Toyota Avensis ZZT251 2003 Service And Repair Manual page 1204

42–10
MP Grease
MP Grease
LHD Steering
Position Type:
AVENSIS REPAIR MANUAL (RM1018E)
CLUTCH
19.
(a)
(b)
D30783
20.
(a)
(b)
21.
(a)
(b)
D30775
22.
RHD Steering
(a)
Position Type:
(b)
D26300
http://vnx.su
– CLUTCH PEDAL SUB–ASSY (MTM)
INSTALL CLUTCH PEDAL TURNOVER BUSH (W/
TURN OVER)
Apply MP grease to the inside of the turn over bush.
Install the turn over bush to the clutch pedal support.
INSTALL CLUTCH PEDAL TURNOVER BUSH (W/
TURN OVER)
Apply MP grease to the inside of the turn over bush.
Install the turn over bush to the clutch pedal.
INSTALL TURN OVER SPRING SEAT COMPRESSION
SPRING (W/ TURN OVER)
Apply MP grease to the contact surface of the bush and
spring.
Install the spring to the clutch pedal and clutch pedal sup-
port.
INSTALL CLUTCH PEDAL SUPPORT SUB–ASSY
LHD steering position type:
Install the clutch pedal support to the vehicle with the 2
nuts and bolt.
Torque:
Bolt: 19 N m (195 kgf cm, 14 ft lbf)
Nut: 12 N m (120 kgf cm, 9 ft lbf)
RHD steering position type:
Install the clutch pedal support to the vehicle with the 2
bolts and 2 nuts.
Torque:
Bolt: 19 N m (195 kgf cm, 14 ft lbf)
Nut: 12 N m (120 kgf cm, 9 ft lbf)