55–96
16.
REMOVE COOLER CONDENSER CUSHION NO.1
17.
REMOVE COOLER CONDENSER CUSHION NO.2
18.
REMOVE CONDENSER BRACKET COLLAR NO.1
E))(0E
14 mm
(0.55 in.)
Hexagon
Wrench
AVENSIS REPAIR MANUAL (RM1018E)
HEATER & AIR CONDITIONER
(c)
Using needle nose pliers, remove the cooler dryer.
I32994
19.
INSTALL COOLER DRYER (W/O HOT GAS HEATER)
(a)
Using needle nose pliers, install the new cooler dryer.
I32994
(b)
Sufficiently apply compressor oil to the fitting surfaces of
the O–ring.
Compressor oil: ND–OIL 8 or equivalent
I32475
(c)
Using a hexagon wrench 14 mm (0.55 in.), install the new
cap on the modulator.
Torque: 2.9 N m (30 kgf cm, 25 in. lbf)
(d)
1AZ–FSE:
Install the bracket with the 2 bolts.
Modulator
I32993
http://vnx.su
–
W/RECEIVER CONDENSER ASSY