RHD:
A
B
LHD:
Matchmarks
30.
REMOVE STEERING INTERMEDIATE SHAFT ASSY NO.2 (RHD STEERING POSITION TYPE)
(a)
Remove the bolt A and steering intermediate shaft assy No. 2.
31.
REMOVE STEERING SLIDING YOKE SUB–ASSY (LHD STEERING POSITION TYPE)
(a)
Remove the bolt A and steering sliding yoke sub–assy.
Matchmarks
AVENSIS REPAIR MANUAL (RM1018E)
STEERING COLUMN
(c)
Matchmarks
(d)
F44789
(e)
A
(f)
B
F44790
(g)
(h)
F45269
32.
(a)
(b)
(c)
F44793
http://vnx.su
–
STEERING COLUMN ASSY
RHD:
Place matchmarks on the intermediate shaft assy No. 2
and steering intermediate shaft.
RHD:
Loosen the bolt A and remove the bolt B, then disconnect
the intermediate shaft assy No.2.
LHD:
Place matchmarks on the steering sliding yoke sub–assy
and steering intermediate shaft.
LHD:
Loosen the bolt A and remove the bolt B, then disconnect
the steering sliding yoke sub–assy.
RHD, M/T:
Remove the bolt and protector.
Remove the 3 bolts and steering column assembly.
REMOVE STEERING SLIDING YOKE SUB–ASSY
(RHD STEERING POSITION TYPE)
Place matchmarks on the steering sliding yoke sub–assy
and steering main shaft.
Remove the bolt and steering sliding yoke sub–assy.
W/VSC:
Remove the steering sensor
50–13
(See page
32–65).