Toyota Avensis ZZT251 2003 Service And Repair Manual page 591

14–90
SST
Seal Packing
Timing Chain Cover side:
3 (0.118)
A
(mm (in.))
AVENSIS REPAIR MANUAL (RM1018E)
ENGINE MECHANICAL
58.
(a)
(b)
NOTICE:
Keep the lip free of foreign objects.
A62174
59.
Seal Width
(a)
4 to 5 mm
(b)
A62175
NOTICE:
S
S
S
B B
A
C
C
http://vnx.su
– CYLINDER HEAD GASKET (1ZZ–FE/3ZZ–FE)
INSTALL TIMING GEAR COVER OIL SEAL
Apply MP grease to a new oil seal lip.
Using SST, tap in the oil seal until its surface is flush with
the timing chain cover edge.
SST 09223–22010
INSTALL TIMING CHAIN OR BELT COVER SUB–ASSY
Remove any old packing material (FIPG) from the contact
surface.
Apply a continuous bead of seal packing (Diameter 3.5
mm to 4.5 mm (0.1379 to 0.177 in.)) as shown in the il-
lustration.
Seal packing:
Water pump part part No. 08826–00100 or equivalent
Other part part No. 08826–00080 or equivalent.
Remove any oil from the contact surface.
Install the oil pan within 3 minutes after applying seal
packing.
Do not expose the seal to engine oil within 2 hours af-
ter installing.
3 (0.118)
4.5 (0.177)
7 (0.276)
A – A
08826–00100 or equivalent
08826–00080 or equivalent
12 (0.472)
6 (0.236)
3 (0.118)
Width 4 (0.157)
B – B
C – C
A65676