Table of Contents
Advertisement
14–294
94.
REMOVE COMMON RAIL ASSY
97.
REMOVE INJECTION PUMP DRIVE PULLEY
SST
09960–10010 (09962–01000, 09963–01000)
98.
REMOVE TIMING BELT NO.3 COVER
(a)
Remove the 2 bolts and 2 seal washers, and then remove the timing belt cover.
99.
REMOVE OIL LEVEL GAGE GUIDE
100. REMOVE INJECTION OR SUPPLY PUMP ASSY
101. REMOVE COMPRESSOR MOUNTING BRACKET NO.1
(a)
Remove the 4 bolts and the compressor mounting bracket.
102. REMOVE WATER INLET
(a)
Remove the 2 bolts and the water inlet.
103. REMOVE THERMOSTAT
104. REMOVE OIL COOLER PIPE
(a)
Remove the union bolt, the oil cooler pipe and the gasket.
105. REMOVE FUEL FILTER TO INJECTION PUMP FUEL PIPE
(a)
Remove the 3 bolts and nut, and then detach the fuel pipe.
AVENSIS REPAIR MANUAL (RM1018E)
ENGINE MECHANICAL
–
PARTIAL ENGINE ASSY (1CD–FTV)
93.
REMOVE INTAKE MANIFOLD INSULATOR NO.1
(a)
Remove the 2 bolts and the intake manifold insulator.
A79150
(See page
11–78)
95.
REMOVE POWER STEERING IDLE PULLEY
BRACKET
(a)
Remove the 3 bolts and the idle pulley bracket.
A61175
96.
REMOVE INTAKE MANIFOLD
(a)
Remove the 2 bolts and the wiring harness clamp bracket.
(b)
Remove the 8 bolts and 2 nuts, and then remove the in-
take manifold and the gasket.
A09671
(See page
(See page
17–22)
http://vnx.su
11–69)
(See page
11–69)
Advertisement
Table of Contents
