Table of Contents
Advertisement
20.
INSTALL FRONT SUSPENSION SUPPORT LH DUST SEAL
(a)
Install a new dust seal.
21.
INSTALL FRONT SUSPENSION SUPPORT SUB–ASSY LH
SST
MP Grease No. 2
AVENSIS REPAIR MANUAL (RM1018E)
FRONT SUSPENSION
–
FRONT SHOCK ABSORBER WITH COIL SPRING
22.
INSTALL FRONT SUPPORT TO FRONT SHOCK
ABSORBER LH NUT
(a)
Using SST to hold the suspension support, install a new
nut.
SST
Torque: 47 N m (479 kgf cm, 35 ft lbf)
(b)
Remove the SST.
SST
SST
F08624
23.
INSTALL FRONT SUSPENSION SUPPORT DUST
COVER LH
(a)
Apply MP grease No. 2 into the suspension support.
CAUTION:
Do not touch grease on rubber surface of the suspension
support.
(b)
Install the dust cover.
F40273
24.
INSTALL FRONT SHOCK ABSORBER WITH COIL
SPRING
(a)
Install the shock absorber with the 2 bolts.
(b)
Install the 3 nuts on the upper side of shock absorber.
Torque: 39 N m (398 kgf cm, 29 ft lbf)
F44622
(c)
Install the 2 nuts to the lower side of shock absorber.
Torque: 220 N m (2,240 kgf cm, 162 ft lbf)
HINT:
Coat the threads of the nuts with engine oil.
F13683
http://vnx.su
09729–22031
09727–30021,09729–22031
26–13
Advertisement
Table of Contents
