Toyota Avensis ZZT251 2003 Service And Repair Manual page 1083

REPLACEMENT
NOTICE:
Do not adjust the brake booster push rod.
1. DRAIN BRAKE FLUID
NOTICE:
Wash the brake fluid off immediately if it adheres to any painted surface.
2. REMOVE BRAKE MASTER CYLINDER SUB–ASSY
(a) w/o VSC:
SST 09023–00100
(b) w/ VSC:
SST 09023–38400
3. REMOVE CLUTCH MASTER CYLINDER ASSY (M/T TRANSAXLE)
SST 09023–00100
4. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE (1AZ–FSE ENGINE TYPE)
(See page 14–204)
5. REMOVE ENGINE COVER NO.1
6. REMOVE IGNITION COIL ASSY (GASOLINE ENGINE TYPE)
7. REMOVE CYLINDER HEAD COVER SUB–ASSY (GASOLINE ENGINE TYPE)
8. REMOVE TIMING BELT NO.2 COVER (DIESEL ENGINE TYPE)
9. REMOVE CYLINDER HEAD COVER SUB–ASSY (DIESEL ENGINE TYPE)
10. REMOVE INJECTOR ASSY (DIESEL ENGINE TYPE)
11. REMOVE FRONT WHEEL RH
AVENSIS REPAIR MANUAL (RM1018E)
BRAKE – BRAKE BOOSTER ASSY (RHD)
12. REMOVE BRAKE TUBE
(a) w/o VSC:
Using SST, disconnect the 6 brake tubes from the brake
actuator.
SST 09023–00100
G24211
(b) w/ VSC:
Using SST, disconnect the 6 brake tubes from the brake
actuator.
SST 09023–00100, 09023–38400
F42291
http://vnx.su
(See page 32–13)
(See page
(See page 14–81)
(See page
(See page 14–318)
32–25
320W4–01
42–13)
(See page 14–81)
14–307)
(See page 14–318)