5.
LEVEL WARNING SWITCH
(a)
Continuity inspection.
(1)
Using an ohmmeter, check that there is continuity between terminals.
Specified condition:
There is continuity when raising a float.
There is no continuity when letting a float down.
6.
FUEL TEMPERATURE SENSOR
(a)
Resistance inspection.
(1)
Using an ohmmeter, measure the resistance between the terminals.
Resistance:
Approx. 20YC (68YF) 2.21 to 2.69 W
Approx. 80YC (176YF) 0.287 to 0.349 W
AVENSIS REPAIR MANUAL (RM1018E)
FUEL
–
FUEL SYSTEM (1CD–FTV)
http://vnx.su
11–57