Table of Contents
Advertisement
11–28
Turn
Push
10.
INSTALL AIR CLEANER CAP SUB–ASSY
11.
CHECK FOR FUEL LEAKS
12.
INSTALL ENGINE COVER SUB–ASSY NO.1
AVENSIS REPAIR MANUAL (RM1018E)
FUEL
(b)
Apply a light coat of spindle oil or gasoline on the place
where a fuel delivery pipe contacts the O–ring.
(c)
Push the fuel injector while twisting it back and forth to
install it to the fuel delivery pipe.
NOTICE:
Y
Be careful not to twist the O–ring.
Y
After installing the fuel injectors, check that they turn
smoothly. If not, reinstall it with a new O–ring.
A77913
8.
INSTALL FUEL DELIVERY PIPE SUB–ASSY
(a)
Install 4 new insulators and the 2 delivery pipe No. 1
spacers to the cylinder head.
(b)
Place the fuel delivery pipe and the 4 fuel injectors togeth-
er to the cylinder head.
Turn
NOTICE:
Be careful not to drop the fuel injectors when installing the
fuel delivery pipe.
(c)
Temporarily install 2 bolts which are used to secure the
A77914
fuel delivery pipe to the cylinder head.
(d)
Check that the fuel injectors rotate smoothly.
If the fuel injectors do not rotate smoothly, the probable cause
is incorrect installation of O–ring. Replace with the O–ring.
(e)
Tighten the 2 bolts.
Torque: 20 N m (204 kgf cm, 15 ft lbf)
(f)
Connect the 4 fuel injector connectors.
(g)
Install the 2 wire harness clamps.
(h)
Connect the ventilation hose.
9.
CONNECT FUEL TUBE SUB–ASSY
Fuel Pipe
(a)
Push in the connector to the pipe until it makes "click"
Clamp
sound.
NOTICE:
Y
Check if there is any damage or foreign objects on the
connected part.
Y
After connecting, check if the connector and the pipe
Push
are securely connected by pulling on them.
(b)
Install the fuel pipe clamp.
A81621
(See page
11–19)
http://vnx.su
–
FUEL INJECTOR ASSY (1AZ–FE)
(See page
10–26)
Advertisement
Table of Contents
