Table of Contents
Advertisement
Triangle Mark
Matchmark
SST
AVENSIS REPAIR MANUAL (RM1018E)
FUEL
(b)
Remove the fuel pump gauge retainer.
(c)
Remove the fuel suction w/ pump & gage tube.
NOTICE:
Be careful that the arm of the fuel sender gage should not
be bent.
(d)
Remove the gasket from the tank.
A78447
8.
INSTALL FUEL SUCTION W/PUMP & GAGE TUBE
ASSY
(a)
Install a new gasket to the fuel tank.
(b)
Install the fuel suction w/ pump & gage tube.
NOTICE:
Be careful that the arm of the fuel sender gage should not
be bent.
(c)
Align the triangle mark of the fuel suction w/ pump & gage
tube with the matchmark location the fuel tank.
A78448
(d)
Temporarily install the fuel pump gauge retainer.
(e)
Using SST, tighten the fuel pump gauge retainer until the
arrow mark is aligned with the center mark on the fuel
tank.
SST
NOTICE:
Do not use other tools in this operation. Damage to the fuel
Rib
pump gauge retainer and the fuel tank may result.
HINT:
A78446
A rib on the fuel pump gauge retainer can be fitted into a tip of
the SST.
(f)
Check that the arrow mark and center mark are aligned
Arrow Mark
as shown in the illustration.
A78449
http://vnx.su
–
FUEL PUMP ASSY (GASOLINE)
09808–14010
11–87
Advertisement
Table of Contents
