Show Call Active Voice; Show Voice Port - Avaya 2330 Reference Manual

By default, voice ports are disabled.
Syntax
[no] shutdown
Example
AG/configure/voice-port (2/1)# shutdown

show call active voice

Use this command to display call information for voice calls in progress.
Syntax
show call active voice [called-number <called-number> | calling-
number <calling-number>]
Table 399: Variable definitions
called-number <called-number>
calling-number <calling-number>
Example
AG# show call active voice

show voice port

Use this command to display configuration information about a specific voice port. There are
many CLI commands under the voice port tree. This command displays information about all
of these configured parameters.
Syntax
show voice port {<slot/[<subslot/]port[:<d-channel>]> | [summary]}
Table 400: Variable definitions
<slot/[<subslot/]port[:<d-channel>]>
Command Line Reference
Variable
Variable
Value
Displays specific called number pattern
related information.
Displays specific calling number pattern
related information.
Value
Port number of the voice card to be
displayed. The <d-channel> value is only
show call active voice
August 2013 363