VLAN commands
show bridge vlan
After you have configured VLANs, use this command to verify operation and the interfaces to
which the VLAN is assigned.
Syntax
show bridge vlan
Example
AG# show bridge vlan
interface vlan
Use this command to select a VLAN interface.
Syntax
interface vlan vlan<vid>
Example
AG/configure# interface vlan vlan10
shutdown
Use this procedure to shut down a VLAN interface.
Syntax
shutdown
Example
AG/configure/interface/vlan vlan10# shutdown
vlan classification
Use this command to enter VLAN classification configuration mode.
108
Command Line Reference
Comments? infodev@avaya.com
August 2013