Syntax
[no] sessiontimer [session-timer {max|min|default} <sec>] [range-
validation]
Table 431: Variable definitions
[no]
range-validation
session-timer {max|min|
default}
<sec>
Example
AG/configure/voice/service/voip/ssm#sessiontimer session-timer max
1200
configure terminal voice service voip ssm sip-server dns-
timeout
Use this command to configure the DNS lookup timeout in milliseconds after which DNS
lookups attempted by the proxy must timeout. By default, the DNS timeout is 86400
milliseconds.
Syntax
[no] dns-timeout <1-4294967295>
Table 432: Variable definitions
[no]
Example
AG/configure/voice/service/voip/ssm/sip-server#dns-timeout 1500
Command Line Reference
configure terminal voice service voip ssm sip-server dns-timeout
Variable
Variable
Value
Sets the specified parameter to the default
value.
Turns on the session timer period validation
requested by endpoints. The no form of the
command resets the parameter to the default
value, that is, to not validate the session timer
range.
Specifies the session timer to configure.
Specifies a value in seconds for the session
timer. Range is 90–4294967295.
Value
Restores the DNS timeout to the default value:
86400 milliseconds.
August 2013
389