<pir-value>
[cbs <cbs-value>]
[pbs <pbs-value>]
[no]
Example
AG/configure/qos/module/policy-map map1/class-map class1/police#
trtcm 10 20 cbs 5000 ebs 10000
configure qos module policy-map class-map rate-
monitoring
Use this command to configure flow rate monitoring for a class to monitor the class traffic flows.
By default, rate monitoring is disabled for a new class.
Syntax
[no] rate-monitoring enable
Table 263: Variable definitions
[no]
Example
AG/configure/qos/module/policy-map map1/class-map class1# rate-
monitoring enable
Command Line Reference
configure qos module policy-map class-map rate-monitoring
Variable
Variable
Value
The peak information rate. Valid Range: 3
Kbps - 10000000 Kbps.
Optional. The committed burst size. The
valid range corresponding to CIR should be
>= (1 * CIR Kbps) and <= (5* CIR Kbps). The
value must be at least as large as the largest
possible packet.
Optional. The peak burst size. The valid
range corresponding to CIR should be >= (1
* CIR Kbps) and <= (5* CIR Kbps). The value
must be at least as large as the largest
possible packet.
Removes the trTCM configuration for the
class.
Value
Disables rate-monitoring for the class.
August 2013
247