Configure Sip-Ua Registrar - Avaya 2330 Reference Manual

The SIP digest authenticates users against their public address, user ID and password. Once
registered and authenticated, the user can dial other registered users in the system. The
requirement for SIP digest authentication is service-provider (and call-server) dependent.
This command is supported only when the AG2330 is interoperating with Sylantro or BroadSoft
call servers.
Syntax
[no] authentication <username> <password>
Table 372: Variable definitions
<username>
<password>
[no]
Example
AG/configure/sip-ua# authentication avayauser avayapw

configure sip-ua registrar

Use this command to enable the AG2330 to register E.164 numbers on behalf of analog
telephone voice ports (Foreign Exchange Station [FXS]) with an external SIP registrar.
The requirement to enable this registration is service-provider and call-server dependent.
This command is supported only when the AG2330 is interoperating with Sylantro or BroadSoft
call servers.
By default, registration is disabled.
Syntax
[no] registrar {dns:<host-name> | ipv4:<ip-addr>[:port-num]} [expires
<registration-time>]
Table 373: Variable definitions
dns:<host-name>
Command Line Reference
Variable
Variable
Value
Specifies the username of the user
authenticating. Maximum length is 12
characters.
Specifies the password for authentication.
Maximum length is 12 characters.
Disables SIP digest authentication.
Value
Specifies the DNS host name of the SIP
registrar server.
configure sip-ua registrar
August 2013 343