T1/E1 module configuration commands
configure module t1 linecode
Use this command to set the type of line coding for a T1 link.
Syntax
linecode {b8zs|ami}
Table 51: Variable definitions
Variable
ami
b8zs
Example
AG/configure/module/t1 (3/1)# linecode b8zs
configure module t1 linemode csu
Use this command to set the amount of T1 line build out (LBO) for the Channel Service Unit
(CSU) interface.
Syntax
linemode csu [lbo] {db_zero | db7_5 | db15 | db22_5}
Table 52: Variable definitions
Variable
db7_5
db15
db22_5
db_zero
Example
AG/configure/module/t1 (3/1)# linemode csu db15
74
Command Line Reference
Value
AMI linecode for T1
B8Zs linecode for T1 (default)
Value
Configure LBO for zero db (default)
Configure LBO for 7.5 db
Configure LBO for 15 db
Configure LBO for 22.5 db
Comments? infodev@avaya.com
August 2013