Configure Snmp-Server Target-Params - Avaya 2330 Reference Manual

<target tag name>
[retry-count]
[timeout]
[NMS port]
<user name>
[auth-type {md5 | sha1}]
[auth-pass <password>]
[encrypt-type {aes128 | des | 3des | aes192
| aes256}]
[encrypt-pass <password>]
[engineid <remote id>]
Example
AG/configure/snmp-server# target-address Addr1 10.1.1.1 Param1
BranchDevice

configure snmp-server target-params

Use this command to configure target parameters.
Command Line Reference
Variable
configure snmp-server target-params
Value
Specifies the name of the target tag.
Specifies the number of times that the
configuration should be tried again.
Default: 3.
Specifies the time in seconds after which the
configuration is retried.
Default: 1500.
Specifies the remote port number of the
NMS. This value is optional when remote id
is used.
Default: 162
Specifies the name of the user.
Specifies the authorization type. Values
include:
• md5
• sha1
Specifies the authorization password.
Specifies the encryption type. Values
include:
• des
• 3des
• aes128
• aes192
• aes256
Specifies the encryption password.
Specifies the remote engine id.
August 2013 141