Configure User; Exit - Avaya 2330 Reference Manual

Example
AG# configure terminal

configure user

Use this command to configure users on the AG2330.
To configure users, you must log in with level 1 user privileges using the administrator
account.
You can configure any new user to have a user privilege level from 2 to 4. The administrator
account is the only account that has level 1 privileges.
Syntax
user <user-name> [<user-level>]
After you enter this command, the system prompts you to enter the password.
Table 3: Variable definitions
Variable
<user-name>
[<user-level>]
Example
AG/configure# user user1 2

exit

Use this command to exits the system CLI or exit from a lower-level command prompt to a
higher-level command prompt in the CLI hierarchy.
Syntax
exit <n>
Table 4: Variable definitions
Variable
<n>
Command Line Reference
Value
Specifies the user name.
Specifies the privilege level for the user, from
2 to 4.
Value
Specifies the number of levels to exit. The
range is 1 - 6; the default is 1.
configure user
August 2013 33