MSTP commands
Table 102: Variable definitions
Variable
[no]
<value>
Example
AG/configure/interface/ethernet (6/1)/spanning-tree/instance 2#
priority 100
spanning-tree portfast
Use this command to enable rapid transitions.
Syntax
[no] portfast
Table 103: Variable definitions
Variable
[no]
Example
AG/configure/interface/ethernet (6/1)/spanning-tree# portfast
spanning-tree portfast bpdu-filter
The Spanning Tree Protocol sends BPDUs from all ports. Enabling the BPDU Filter feature
ensures that PortFast-enabled ports do not transmit or receive any BPDUs. Use this command
to enable PortFast BPDU filter on a port.
Syntax
[no] portfast bpdu-filter
120
Command Line Reference
Value
Restores the default priority value for an
MSTP instance.
Specifies the port priority that you assign to
the MSTP instance. The default value for
priority is 32768. Bridge priority values are in
increments of 4096. Valid values are 0 to
61440.
Value
Disables rapid transitions.
Comments? infodev@avaya.com
August 2013