Chapter 17: RMON commands
clear event_log
Use this command to clear the event log.
Syntax
[no] clear event_log
Example
AG# clear event_log
clear rmon_logs
Use this command to clear the RMON logs.
Syntax
clear rmon_logs
Example
AG# clear rmon_logs
configure rmon alarm
Use this command to configure an RMON Alarm for a variable. Before configuring an alarm a
valid RMON event should be configured which can be associated with the RMON alarm.
The maximum number of alarms is 100.
Syntax
[no] rmon alarm <1-65535> <variable> <interval> <rising-threshold>
<falling-threshold> <rising-event> <falling-event> [type <type>]
[startup <startup>] [owner <owner>]
Command Line Reference
August 2013
151