Configure Interface Bundle Link Prie1|Prit1; Show Isdn Interface - Avaya 2330 Reference Manual

ISDN configuration commands
Table 60: Variable definitions
Variable
slot/port
links
Example
AG/configure/interface/bundle bri1# link bri 3/1:2

configure interface bundle link prie1|prit1

Use this command to link a bundle to the PRI interface in order to configure the ISDN properties
and encapsulation for the interface.
Syntax
link {pri_e1 | pri_t1} <slot/port:links>
Table 61: Variable definitions
Variable
pri_e1
pri_t1
slot/port
links
Example
AG/configure/interface/bundle pri1# link pri_t1 3/1:10

show isdn interface

Use this command to display ISDN information for the specified interface.
Syntax
show isdn interface <IFNAME>
Table 62: Variable definitions
Variable
84 Command Line Reference
Value
slot and port of the BRI module.
1 (64Kb/s) or 2 (128 Kb/s)
Value
Configure a PRI link on E1 module.
Configure a PRI link on T1 module.
slot and port of the PRI module.
Range for E1: 1 - 30 Range for T1: 1 - 23
Value
Comments? infodev@avaya.com
August 2013