Configure Qos Module User-Priority-Cos-Map; Show Qos Module Congestion-Profile - Avaya 2330 Reference Manual

Example
AG/configure/qos/module# rate-monitoring sampling-interval 60

configure qos module user-priority-cos-map

Syntax
[no] user-priority-cos-map <userpriority-value> { [queue <queue-no> ]
[drop-precedence <low | medium | high>] }
Table 266: Variable definitions
<userpriority-value>
[queue <queue-no>]
[drop-precedence <low | medium | high>]
[no]
Example
AG/configure/qos/module# user-priority-cos-map 0 queue 8 drop-
precedence high

show qos module congestion-profile

Syntax
show qos module congestion-profile <profile-id> [<queue-id>]
Table 267: Variable definitions
<profile-id>
[<queue-id>]
Command Line Reference
Variable
Variable
configure qos module user-priority-cos-map
Value
The user priority value of the priority tagged
packet. Valid Range: 0-7
The output queue assigned. Valid Range:
1-8
The drop precedence value assigned. Valid
Range: low / medium / high.
Resets the user-priority CoS mapping to
default values.
Value
One of the four congestion profile IDs. Valid
range: 1 – 4
Optional. Queue identifier. Valid range: 1 – 8
If queue-id is not specified, the congestion
avoidance parameters associated with all 8
August 2013 249