Configure Interface Qos Chassis Red - Avaya 2330 Reference Manual

Example
AG/configure/interface/ethernet (0/3)/qos/chassis# ewf weighting-
factor 3

configure interface qos chassis red

Use this command to specify WRED or DS-RED parameters on an interface to configure
congestion avoidance on outbound flows.
At the interface level, you can only enable WRED or DS-RED for WAN interfaces.
Syntax
[no] red [pvc <1-4096>] {[minth-green <percent>] [maxth-green
<percent>] [mpdgreen <1-15>] [minth-yellow <percent>] [maxth-yellow
<percent>] [mpd-yellow <1-15>] [minth-red <percent>] [maxth-red
<percent>] [mpd-red <1-15>] } | {[dscp <0-63>] [minth <percent>]
[maxth <percent>]}[mpd <1-15>]
Table 200: Variable definitions
[pvc <1-4096>]
[minth-green <percent>]
[minth-yellow <percent>]
[minth-red <percent>]
[maxth-green <percent>]
[maxth-yellow <percent>]
[maxth-red <percent>]
[mpdgreen <1-15>]
[mpd-yellow <1-15>]
[mpd-red <1-15>]
Command Line Reference
Variable
configure interface qos chassis red
Value
Specifies the PVC ID. Not required for non-
Frame Relay interfaces.
Minimum Threshold for green (WRED). Valid
Range: 1-100.
Minimum Threshold for yellow (WRED).
Valid Range: 1-100.
Minimum Threshold for red (WRED). Valid
Range: 1- 100.
Maximum Threshold for green (WRED).
Valid Range: 1-100.
Maximum Threshold for yellow (WRED).
Valid Range: 1-100.
Maximum Threshold for red (WRED). Valid
Range: 1- 100.
Mark Probability Denominator (as power of
2) for green(WRED). Valid Range: 1-15.
Mark Probability Denominator (as power of
2) for yellow(WRED). Valid Range: 1-15.
Mark Probability Denominator (as power of
2) for red(WRED). Valid Range: 1-15.
August 2013 205