Configure Dial-Peer Voice Shutdown; Show Dial-Peer Voice - Avaya 2330 Reference Manual

SIP Media Gateway commands
AG/configure# dial-peer voice voip 400 AG/configure/dial-peer/voice/
pots 400# destination-pattern 555[03579]439

configure dial-peer voice shutdown

Use this procedure to enable and disable the selected dial peer. By default, dial peers are
disabled. To enable the dial peer, use the no form of this command.
Syntax
[no] shutdown
Example
AG/configure/dial-peer/voice/pots 10# no shutdown
AG/configure/dial-peer/voice/voip 20# shutdown

show dial-peer voice

Use this command to display information for voice dial peers.
Syntax
show dial-peer voice {<tag> | summary}
Table 361: Variable definitions
<tag>
summary
Example
AG# show dial-peer voice 2
334 Command Line Reference
Variable
Comments? infodev@avaya.com
Value
Displays detailed information about the dial
peer specified by the tag. Range is from 1 to
2147483647.
Displays a short summary of each voice dial
peer.
August 2013