DHCPv4 commands
Example
AG/configure/ip/dhcps/pool p2# dnsserver 10.8.7.6
configure ip dhcps pool domain
Use this command to configure the domain name for the address pool.
Syntax
domain <domain>
Table 149: Variable definitions
Variable
<domain>
Example
AG/configure/ip/dhcps/pool p2# domain mydomain
configure ip dhcps pool exclude-range
Use this command to add or modify address ranges to be excluded from the address pool.
Syntax
exclude-range <start-ip> <end-ip>
Table 150: Variable definitions
Variable
<start-ip> <end-ip>
Example
AG/configure/ip/dhcps/pool p2# exclude-range 10.1.1.0 10.1.1.5
configure ip dhcps pool host
Use this command to configure the host IP address for the address pool.
162
Command Line Reference
Value
Domain name string.
Value
Specifies the starting and ending IP address
range to exclude.
Comments? infodev@avaya.com
August 2013