Chapter 5: Commissioning commands
admin_name
Use this command to change the administrator log-in name (Level 1 access) to a user-specified
name.
Syntax
admin_name <WORD>
Table 13: Variable definitions
Variable
<WORD>
Example
AG/configure# admin_name fremont
boot_params
Use this command to configure the boot parameters.
Syntax
boot_params
Example
AG/configure# boot_params
clear telnet session
You can disconnect a specific Telnet session, if necessary, or you can disconnect all Telnet
sessions simultaneously.
Command Line Reference
Value
Specifies the new name.
August 2013
47