Configure Snmp-Server Enable Traps Cpu Total - Avaya 2330 Reference Manual

• Enable console logging and also change the event-log priority to info.
• Enable system logging and also change the sys-log priority to info.
Syntax
threshold process red <%red> green <%green> interval <interval>
notify <type>
Table 441: Variable definitions
<%red>
<%green>
<interval>
<type>
Example
• AG/configure/process cpu# threshold process red 90 green 50
interval 10 notify cont
• AG/configure/process cpu# threshold process red 90 green 50
interval 10 notify once

configure snmp-server enable traps cpu total

Use this command to configure a trap notification for total CPU utilization.
You can configure the system to generate traps for total CPU utilization. This notification
provides data regarding the color (green/yellow/red) of the entire system when the color
changes. Traps can be generated either only once when the corresponding threshold is
breached or periodically at regular intervals.
Command Line Reference
Variable
configure snmp-server enable traps cpu total
Value
Red threshold in percentage. (Default: 85)
Green threshold in percentage. (Default: 70)
Duration in seconds for which the CPU
utilization is measured. You can enter
multiples of 10 up to a maximum of 60
seconds. (Default: 30)
• cont - this type generates notification
periodically at the interval specified.
• once - this type generates notification once
when the utilization changes from one
threshold to another threshold.
(Default: once)
August 2013 401