Configure Dial-Peer Voice Pots Register E164; Configure Sip-Ua Authentication - Avaya 2330 Reference Manual

SIP Media Gateway commands
Table 371: Variable definitions
<username>
<password>
[no]
Example
AG/configure/dial-peer/voice/pots 10# authentication avayauser
avayapw

configure dial-peer voice pots register e164

Use this command to trigger SIP registration of the full E.164 destination-pattern number of a
POTS dial peer. This allows you to register FXS ports with the SIP registrar.
This command is supported only when the AG2330 is interoperating with Sylantro or BroadSoft
call servers.
To enable registration, you must define the dial-peer destination pattern to match the number
that is configured on the SIP Call Server. If the destination pattern does not match the SIP Call
Server number, the dial peer cannot register. To disable registration, use the no form of this
command.
In addition, to enable registration, the selected dial peer must be enabled.
By default, registration is disabled.
Syntax
[no] register e164
Example
AG/configure/dial-peer/voice/pots# register e164

configure sip-ua authentication

If the SIP call server uses a global authentication value for all users, use this command to enter
SIP digest authentication information.
By default, no authentication is configured.
342 Command Line Reference
Variable
Comments? infodev@avaya.com
Value
Specifies the username of the user
authenticating. Maximum length is 12
characters.
Specifies a password for authentication.
Maximum length is 12 characters.
Disables SIP digest authentication.
August 2013