Chapter 21: IPv4 routing commands
clear ip prefix-list
Use this command to reset the hit count to zero in the prefix-list entries.
Syntax
ip prefix-list <listname> [<A.B.C.D/M>]
Table 172: Variable definitions
<listname>
[<A.B.C.D/M>]
Example
AG/configure# clear ip prefix-list List1
configure access-list
Use this command to configure an access list.
Syntax
access-list <listname> [permit|deny|remark]
Table 173: Variable definitions
<listname>
Example
AG/configure# access-list mylist permit any
Command Line Reference
Variable
Variable
Value
Specifies the name of the prefix-list.
IP prefix and length.
Value
A name for the access list.
August 2013
183