Chassis QoS commands
configure qos chassis policy-map class-map pbr-redirect
Use this command to configure policy-based redirect to redirect traffic from a specified class
to a particular interface or next hop.
Syntax
[no] pbr-redirect {[nexthop <ip-address>] | [lsp <lsp-name>] |
[interface <interface name>]}
Table 216: Variable definitions
[nexthop <ip-address>]
[lsp <lsp-name>]
[interface <interface name>]
[no]
Example
AG/configure/qos/chassis/policy-map map1/class-map class1# pbr-
redirect interface vlan10
configure qos chassis policy-map class-map police color-
aware
Use this command to enable srTCM or trTCM to run in color aware mode for the class map to
allow consideration of previous DSCP markings.
Syntax
[no] color-aware
Table 217: Variable definitions
[no]
Example
AG/configure/qos/chassis/policy-map map1/class-map class1/police#
color-aware
216
Command Line Reference
Variable
Variable
Comments? infodev@avaya.com
Value
Nexthop IPv4/IPv6 address.
MPLS LSP interface name.
Egress interface name.
Resets the values to null. It will disable the
feature as well.
Value
Disables color aware mode.
August 2013