Configure Dial-Peer Voice - Avaya 2330 Reference Manual

Syntax
clear statistics dial-peer voice <tag>
Table 357: Variable definitions
<tag>
Example
AG# clear statistics dial-peer voice 1234

configure dial-peer voice

Use this command to define a particular dial peer and to specify the method of voice
encapsulation.
By default, no dial peers are defined.
Syntax
[no] dial-peer voice {pots | voip} <tag>
Table 358: Variable definitions
pots
voip
<tag>
[no]
Example
AG/configure# dial-peer voice pots 10
Command Line Reference
Variable
Variable
Value
Clears statistics for the specified dial peer. A
valid entry is any integer that identifies a
specific dial peer. Range is from 1 to
2147483647.
Value
Indicates that this is a POTS peer that uses
VoIP encapsulation on the IP backbone.
Indicates that this is a VoIP peer that uses
voice encapsulation on the POTS network.
Specifies a tag for the dial peer. Valid range
is : 1-2147483647.
Deletes a defined dial peer. Alternately, to
disable a dial peer, you can use the
shutdown command from the
configure dial-peer voice
{pots | voip} subtree.
configure dial-peer voice
no
August 2013 331