Show Qos Chassis - Avaya 2330 Reference Manual

Chassis QoS commands
[mpd-yellow <1-15>]
[mpd-red <1-15>]
[minth <percent>]
[maxth <percent>]
[dscp <0-63>]
[mpd <1-15>]
[no]
Example
AG/configure/qos/chassis/policy-map map1/class-map class1# red
minth-red 30 maxth-red 60 mpd-red 5 minth-yellow 40 maxth-yellow 80
mpd-yellow 4 minth-green 60 maxth-green 95 mpd-green 6

show qos chassis

Use this command to display service policy map information for the specified interface. If a
class map is specified then the output displays information about that class map only.
Syntax
show qos chassis <interface-type> <interface-name> [pvc <pvc-id>]
[class <class-map-name>] [direction {inbound | outbound}] [mpls] [lsp
<lsp>]
Table 221: Variable definitions
[direction {inbound | outbound}]
<interface-type>
<interface-name>
220 Command Line Reference
Variable
Variable
Comments? infodev@avaya.com
Value
Mark Probability Denominator (as power of
2) for yellow(WRED). Valid Range: 1-15.
Mark Probability Denominator (as power of
2) for red(WRED). Valid Range: 1-15.
Minimum Threshold for DS-RED. Valid
Range: 1-100.
Maximum Threshold for DS-RED. Valid
Range: 1-100.
DiffServ Codepoint for DS-RED. Valid
Range: 0-63/string.
Mark Probability Denominator (as power of
2) for DS-RED. Valid Range: 1-15.
Resets the WRED parameters to its default
values, which depends on the interface, and
removes the DS-RED parameters if
specified.
Value
Specifies to display statistics for inbound or
outbound direction.
Specifies the interface type: ethernet,
bundle, tunnel, vlan or crypto.
Name of the interface.
August 2013