Table 44: Variable definitions
no
Example
AG/configure/module/t1 (3/1)# alarms hierarchy
configure module t1 circuitId
Use this command to specify an optional circuit name for a T1 channel.
Syntax
cicuitId [cktId] <circuit-id>
Table 45: Variable definitions
Variable
<circuit-id>
Example
AG/configure/module/t1 (3/1)# circuit_Id Main01
configure module t1 clock_source
Use this command to specify a network timing source for a T1 link.
Syntax
clock_source {backplane|internal|line}
Table 46: Variable definitions
Variable
backplane
internal
line
Command Line Reference
Variable
Value
Disables hierarchy.
Value
Optional circuit ID for the T1 channel.
Value
Sets the clock source to the backplane of the
AG2330.
Sets the clock source to the internal clock of
the AG2330 (default).
Sets the clock source to be recovered from
the incoming T1 signal (loop timing).
configure module t1 circuitId
August 2013
71