Sip Ua Configuration Commands; Clear Sip-Ua Statistics; Configure Sip-Ua Outbound-Proxy - Avaya 2330 Reference Manual

SIP Media Gateway commands

SIP UA configuration commands

clear sip-ua statistics

Use this command to reset the SIP UA statistical counters.
Syntax
clear sip-ua statistics
Example
AG# clear sip-ua statistics

configure sip-ua outbound-proxy

Use this command to configure an outbound proxy address for the Session Initiation Protocol
(SIP) server interface. By default, no outbound proxy is configured.
You must configure the outbound proxy before configuring a SIP UA sip-server and
registrar.
Syntax
outbound-proxy {dns<host-name> | ipv4:<ip-addr>[:port-num]}
Table 324: Variable definitions
Variable
dns<host-name>
ipv4:<ip-addr>
[:port-num]
Example
AG/configure/sip-ua# outbound-proxy ipv4:10.10.10.1
302 Command Line Reference
Value
Specifies a valid DNS host name for the SIP
proxy in the following format:
name.gateway.xyz.
Specifies the SIP proxy interface to an IP
address. A valid IP address takes the
following format: xxx.xxx.xxx.xxx.
Specifies the port number to use.
Comments? infodev@avaya.com
August 2013