Configure Terminal System Logging Syslog Module Voip-Ssm-Cdr - Avaya 2330 Reference Manual
Advanced gateway
Hide thumbs
Also See for 2330:
- Manual (176 pages) ,
- Regulatory information (72 pages) ,
- Installation manual (52 pages)
Table of Contents
Advertisement
SSM commands
Table 415: Variable definitions
<25-300>
Example
AG/configure#system license ssm_users 25
Enter License key:
configure terminal system logging syslog module voip-
ssm-cdr
Use this command to configure the CDR feature for SIP survivability. By default, CDR is
disabled.
In order to enable SSM CDR, you must set the message level to notice.
Syntax
[no] system logging syslog module voip-ssm-cdr{sys9 | sys10 | sys11 |
sys12 | sys13| sys14 | local0 | local1 | local2 | local3 | local4 |
local5 | local6 | local7}{emerg | alert | crit | err | warn | notice
| info | debug | none}
Table 416: Variable definitions
[no]
{sys9 | sys10 | sys11 |
sys12 | sys13| sys14 |
local0 | local1 | local2 |
local3 | local4 | local5 |
local6 | local7}
{emerg | alert | crit | err
| warn | notice | info |
debug | none}
378
Command Line Reference
Variable
Variable
Comments? infodev@avaya.com
Value
Specifies the maximum number of registered
users..
Value
Disables CDR generation.
Specifies system or locally defined messages.
Specifies the level of messages to log:
• emerg: emergency only alert
• alert: alert and above
• crit: critical and above
• err: error and above
• warn: warning and above
• notice: notification and above
August 2013
Advertisement
Table of Contents
