Configure Terminal Voice Service Voip Ssm Enable; Configure Terminal Voice Service Voip Ssm Keepalive-Server - Avaya 2330 Reference Manual

Syntax
[no] domain <domain-name>
Table 425: Variable definitions
[no]
<domain-name>
Example
AG/configure/voice/service/voip/ssm/sip-server# domain 10.10.0.1

configure terminal voice service voip ssm enable

Use this command to enable or disable the SIP survivability functionality. By default,
survivability is disabled.
Prerequisites
You cannot enable SIP survivability until you bind an IP address for SSM using the bind
ip command.
Syntax
[no] enable
Table 426: Variable definitions
[no]
Example
AG/configure/voice/service/voip/ssm#enable
configure terminal voice service voip ssm keepalive-
server
Use this command to configure the address of the central SIP server to which keepalive
messages are sent. It also specifies the interval at which OPTIONS messages are sent to the
central server along with the number of retries before taking a decision on the change from
normal mode to survivable mode. By default, keepalives are disabled.
Command Line Reference
Variable
Variable
configure terminal voice service voip ssm enable
Value
Removes the specified domain.
Specifies the domain name as either ipv4:<ipaddr>
or dns:<host-name>.
Disables the SIP survivability server.
Value
August 2013 385