Show Module Thresholds; Show Module Userstats - Avaya 2330 Reference Manual

show module thresholds

Use this command to show the alarm threshold settings for a module interface. Alarm
thresholds are configured on a per-module basis.
Syntax
show module thresholds {e1|t1} <slot/port>
Example
AG# show module thresholds t1 2/1

show module userstats

Use this command to display performance statistics for a T1/E1 module interface.
You can view statistics for multiple 15-minute intervals by specifying the number of intervals
you wish to view (from 1 to 96). To clear these statistics after viewing them, use the clear
module command.
Syntax
show module userstats {e1|t1} <slot/port> [interval_range <1-96>]
Example
AG# show module userstats t1 2/1
Command Line Reference
show module thresholds
August 2013 79