configure ipv6 hop-limit
Use this command to configure the hop-limit for outgoing IPv6 packets.
Syntax
ipv6 hop-limit <hop-limit>
Table 187: Variable definitions
Variable
<hop-limit>
Example
AG/configure# ipv6 hop-limit 65
configure ipv6 icmp rate-limit
Use this command to configure ICMPv6 rate limit.
Syntax
ipv6 icmp rate-limit <rate-limit>
Table 188: Variable definitions
Variable
<rate-limit>
Example
AG/configure# ipv6 icmp rate-limit 5000
configure ipv6 load-balancing
Use this command to specify load balancing policy for equal cost routes (default = per flow).
Command Line Reference
Value
Hop limit on outgoing IPv6 packets, in the
range 1 - 255.
Value
Specifies the time interval for sending ICMP
messages in milliseconds (default : 500ms,
0 disables rate limit). Acceptable values are
in the range: 0 - 1000000
configure ipv6 hop-limit
August 2013
195