Configure Interface Ethernet Dot1X Quiet-Period; Configure Interface Ethernet Dot1X Reauthentication; Configure Interface Ethernet Dot1X Reauth-Period - Avaya 2330 Reference Manual

force-unauthorized
[no]
Example
AG/configure/interface ethernet (6/4)/dot1x# port-control force-
authorized

configure interface ethernet dot1x quiet-period

Use this command to set the 802.1x quiet-period time interval. The default is 60 seconds.
When the system cannot authenticate a client, the system remains idle for a quiet-period
interval of time, then tries again. By administratively changing the quiet-period interval, by
entering a lower number than the default, a faster response time can be provided.
Syntax
quiet-period <1-65535>
Example
AG/configure/interface ethernet (6/4)/dot1x# quiet-period 30

configure interface ethernet dot1x reauthentication

Use this command to enable or disable reauthentication on a port.
Syntax
reauthentication {enable | disable}
Example
AG/configure/interface ethernet (6/4)/dot1x# reauthentication enable

configure interface ethernet dot1x reauth-period

Use this command to set the interval between reauthorization attempts. The default is 3600
seconds.
Command Line Reference
Variable
configure interface ethernet dot1x quiet-period
Value
Force a port to always be in an unauthorized
state.
Removes the port from 802.1x
management.
August 2013 285