[no]
Example
AG/configure/sla/profile 1# description SLA toSJ
configure sla profile icmp-echo
To calculate RTT delay, use this command to configure ICMP echo parameters.
Syntax
[no] icmp-echo <ip-address>
Table 277: Variable definitions
<ip-address>
[no]
Example
AG/configure/sla/profile 1# icmp-echo 10.1.2.3
configure sla profile icmp-v6-echo
Use this command to configure ICMPv6 echo
Syntax
[no] icmp-v6-echo <ipv6-address>
Table 278: Variable definitions
<ipv6-address>
[no]
Example
AG/configure/sla/profile 1# icmp-v6-echo 2001::3
Command Line Reference
Variable
Variable
Variable
Value
Removes the description.
Value
IP address of the destination system.
Removes all the icmp-echo configurations.
Value
IPv6 address of the destination system.
Removes all the icmp-v6-echo
configurations.
configure sla profile icmp-echo
August 2013
257