Configure Ipv6 Access-List; Configure Ipv6 General-Prefix - Avaya 2330 Reference Manual

IPv6 routing commands
Syntax
ipv6 redirects
Example
AG/configure/interface/ethernet (0/4)# ipv6 redirects

configure ipv6 access-list

Use this command to configure an access list for filtering frames. Use the no parameter to
remove a specified access-list.
Syntax
[no] ipv6 access-list <listname> [permit|deny|remark] {X:X::X:X/M |
any}
Table 185: Variable definitions
Variable
<listname>
{X:X::X:X/M | any}
Example
AG/configure# ipv6 access-list mylist permit 3ffe:506::/32

configure ipv6 general-prefix

Use this command to configure a general prefix name with an NW prefix.
Syntax
ipv6 general-prefix <prefix-name> <NW-name>
Table 186: Variable definitions
Variable
<prefix-name>
<NW-name>
Example
AG/configure# ipv6 general-prefix myprefix ::FFFF:0000/24
194 Command Line Reference
Value
A name for the access list.
Specifies the prefix to match.
Value
Prefix name
NW prefix in the format: xxxx:yyyy::/
prefix_len
Comments? infodev@avaya.com
August 2013