Configure Snmp-Server Engine-Id - Avaya 2330 Reference Manual

SNMP commands
Syntax
[no] system [trap_shutdown shutdown] [trap_login login] [trap_logoff
logoff] [trap_loginfail loginfail] [trap_authloginfail authfail]
[trap_authloginsuccess authsuccess] [trap_logout logout]
Table 123: Variable definitions
[trap_shutdown shutdown]
[trap_login login]
[trap_logoff logoff]
[trap_loginfail loginfail]
[trap_authloginfail authfail]
[trap_authloginsuccess authsuccess]
[trap_logout logout]
Example
AG/configure/snmp-server/enable/traps# system trap_shutdown shutdown

configure snmp-server engine-id

Use this command to configure a local or a remote engine id. The remote engine id allows
SNMPv3 informs to be set up to a remote NMS.
Syntax
engine-id {[local <id>] | [remote <id> [remote host ipAddr] [remote-
port]]}
Table 124: Variable definitions
[local <id>]
[remote <id>]
[remote host ipAddr]
[remote-port]
136 Command Line Reference
Variable
Variable
Comments? infodev@avaya.com
Value
Enables traps for system shutdowns.
Enables traps for system logons.
Enables traps for system logoffs.
Enables traps for failed user login attempts.
Enables authentication login fail trap.
Enables authentication login success trap.
Enables authentication logout trap.
Value
Specifies the local engine id.
Specifies the remote engine id.
Specifies the remote host ip address of the
NMS in dot format (a.b.c.d). This value is
required if remote id is used.
Specifies the remote port number of the
NMS. This value is optional when remote id
is used.
Default: 162
August 2013