Debug Packet-Dump; Debug Process Start-History - Avaya 2330 Reference Manual

Troubleshooting commands
Table 465: Variable definition
Variable
<bundle>
Example
AG# debug isdn q921Statistics test

debug packet-dump

Use this command to apply an access list to an interface for packet dump.
Syntax
[no] debug packet-dump <interface> <in|out> [mac <name>] [ip <name>]
[ ipv6 <name>] [detail]
Table 466: Variable definition
Variable
<in|out>
<interface>
<name>
Example
AG# debug packet-dump ethernet0/1 in ip rs1

debug process start-history

Use this command to start the history collection for a process.
Syntax
start-history <WORD>
Table 467: Variable definitions
<WORD>
444 Command Line Reference
The bundle name.
The packet direction, in or out.
The interface to debug.
The ruleset name.
Variable
Comments? infodev@avaya.com
Value
Value
Value
Name of the process
August 2013