show ssm registered-users
Use this command to display the registered users in the survivability subsystem.
Syntax
show ssm registered-users {<username> |all} [domain ipv4:<ipv4-
address> dns:<host-name>]
Example
AG#show ssm registered-users all
show ssm registrar
Use this command to display the values of the expires and max-contacts properties that are
configured within the survivability subsystem. This command also shows the configured back-
up registration policy.
Syntax
show ssm registrar
Example
AG#show ssm registrar
show ssm session-timer
Use this command to display the values of the range validation and session timer
parameters.
Syntax
show ssm session-timer
Example
AG#show ssm session-timer
Command Line Reference
show ssm registered-users
August 2013
393