Chapter 6: T1/E1 Module Configuration Commands; Clear Module; Configure Interface Bundle Drop - Avaya 2330 Reference Manual

Chapter 6: T1/E1 module configuration

clear module

Use this command to clear user statistics for a T1/E1 module interface.
Syntax
clear module {e1_userstats|t1_userstats} <slot/port>
Example
AG# clear module e1_userstats 2/1

configure interface bundle drop

Use this command to allow system to drop an errored T1 or E1 link from the bundle. A bundle
is dropped if excessive errors of a user-specified type occur for a user-defined time interval.
This parameter does not apply for single-T1 or E1 link and N x DS0 (fractional T1 or E1)
bundles.
Syntax
drop error_type {es | ses | uas | eev | bpv | css | oof | crc } <drop-
value>
Table 29: Variable definitions
Variable
error_type
es
ses
uas
eev
Command Line Reference
commands
Value
Error condition that will cause droppage of a
T1 or E1 link from the bundle.
Errored Seconds
Severely Errored Seconds
Unavailable Seconds
Excessive Error Violations Seconds
August 2013 61