Show System Configuration - Avaya 2330 Reference Manual

Basic CLI commands
Enter the command without any options to show the full configuration.
Syntax
show startup-config
Table 9: Variable definitions
file
begin <string>
include <string>
exclude <string>
include-section <string>
exclude-section <string>
The optional <string> is formed by 3 substrings, for example <string1> <string2> <string3>,
such as "interface ethernet 0/1". Each of these substrings consists of a maximum of 40
characters.
Examples
AG# show startup-config file oldsystem.cfg begin interface
AG# show startup-config file oldsystem.cfg include interface
AG# show startup-config file oldsystem.cfg include interface ethernet
AG# show startup-config file oldsystem.cfg exclude interface
AG# show startup-config file oldsystem.cfg exclude interface ethernet
0/1
AG# show startup-config file oldsystem.cfg include-section interface
AG# show startup-config file oldsystem.cfg exclude-section interface

show system configuration

Use this command to display the system configuration.
Syntax
show system configuration
38 Command Line Reference
Variable
Comments? infodev@avaya.com
Value
Local file name.
The default is system.cfg
Displays the configuration starting at the line
that matches the string..
Displays lines containing the string.
Displays lines not containing the string.
Displays lines containing and associated
with the string.
Displays lines not containing and not
associated with the string.
August 2013