Syntax
[no] trunk group <trunk-group-name>
Table 387: Variable definitions
<trunk-group-name>
[no]
Example
AG/configure# trunk group SPTrunk
configure dial-peer voice pots trunkgroup
Use this command to assign a dial peer to a trunk group for trunk group label routing.
Syntax
[no] trunkgroup <trunk-group-name>
Table 388: Variable definitions
<trunk-group-name>
[no]
Example
AG/configure/dial-peer/voice/pots 10# trunkgroup north5
configure voice-port trunk-group
Use this command to assign an analog voice port to a trunk group.
A voice port can belong to only one trunk group. Multiple voice ports can belong to the same
trunk group.
Syntax
[no] trunk-group <trunk-group-name>
Command Line Reference
Variable
Variable
configure dial-peer voice pots trunkgroup
Value
Specifies the name of the trunk group.
Maximum length is 16 alphanumeric
characters.
Deletes the specified trunk group.
Value
Specifies the name of the trunk group.
Maximum length is 16 alphanumeric
characters.
Deletes the dial peer from the trunk group.
August 2013
355