Configure Module E1 Clock_Source; Configure Module E1 Contactinfo - Avaya 2330 Reference Manual

Table 33: Variable definitions
Variable
<circuit-id>
Example
AG/configure/module/e1 (3/1)# circuit_Id Main01

configure module e1 clock_source

Use this command to configure the clock source to set the network timing source for an E1
link.
Syntax
clock_source {internal | line}
Table 34: Variable definitions
Variable
internal
line
Example
AG/configure/module/e1 (3/1)# clock_source line

configure module e1 contactInfo

Use this command to specify contact information for a person who can provide details
regarding the E1 link.
Syntax
contactInfo <contact-info>
Table 35: Variable definitions
Variable
Command Line Reference
configure module e1 clock_source
Value
optional circuit ID for the E1 channel.
Value
Sets the clock source to the internal clock of
the Avaya Advanced Gateway 2330
(default).
Sets the clock source to be recovered from
the incoming E1 signal (loop timing).
Value
August 2013 65