configure module t1 enable
Use this command to places a T1 link in service and allow the link to transmit and receive
data.
Syntax
[no] enable
Table 49: Variable definitions
Variable
[no]
Example
AG/configure/module/t1 (3/1)# enable
configure module t1 framing
Use this command to configure T1 framing.
Syntax
framing {esf| d4}
Table 50: Variable definitions
Variable
esf
d4
Example
AG/configure/module/t1 (3/1)# framing esf
Command Line Reference
Value
Takes the T1 link out of service. This action
sends an all-ones Alarm Indication Signal
(AIS) to the far end and places the link out of
service.
Value
Specifies extended super frame framing
format for T1 (default).
Specifies super frame framing format for
T1.
configure module t1 enable
August 2013
73