Configure Dial-Peer Voice Description; Configure Dial-Peer Voice Destination-Pattern - Avaya 2330 Reference Manual

Advanced gateway
Hide thumbs Also See for 2330:
Table of Contents

Advertisement

SIP Media Gateway commands

configure dial-peer voice description

Use this command to attach a text string description to the connection for this dial-peer. This
description appears in various displays and is useful for tracking the purpose or use of the dial-
peer.
By default, no description is configured.
Syntax
[no] description "<description>"
Table 359: Variable definitions
"<description>"
[no]
Example
AG/configure/dial-peer/voice/pots 10# description "To FXO Trunk"

configure dial-peer voice destination-pattern

Use this command to specify a destination pattern for the E.164 or private dialing plan
telephone number to be used for a dial peer.
By default, no destination pattern is defined.
The pattern you configure is used to match dialed digits to a dial peer. The dial peer is then
used to complete the call. When a gateway receives voice data, it compares the called number
(the full E.164 telephone number) in the packet header with the number configured as the
destination pattern for the voice-telephony peer. The AG2330 then strips out the left-justified
numbers that correspond to the destination pattern.
If you have configured a prefix for the dial peer (using the prefix command), the prefix is
appended to the front of the remaining numbers, creating a dial string, which the AG2330 then
dials. If all numbers in the destination pattern are stripped out, the user receives a dial tone.
When you configure the destination pattern, set the string to match the local dialing
conventions. There are certain areas in the world (for example, certain European countries)
where valid telephone numbers can vary in length. Use the optional control character T to
332
Command Line Reference
Variable
Comments? infodev@avaya.com
Value
Specifies a description for the dial peer. Valid
value is a character string from 1 to 25
characters in length, delimited by quotation
marks (" ").
Removes the description.
August 2013

Advertisement

Table of Contents
loading

Table of Contents